Computers & Printers |
|
|
|
 |
Service |
|
|
|
|
|
RAM-Mounts™ Products |
|
|
|
|
|
Quick Links |
|
|
|
|
|
About Us |
|
|
|
|
|
|
|
Contact Us |
|
|
|
|
|
|
|
RAM Mounts™ PDA & Cell Phone Products (SORTED BY MODEL #) |
|
 |
RAM-B-149Z
U-bolt bicycle and motorcycle universal mount. This versatile
kit includes a RAM-B-231Z U-bolt mount, RAM-B-201 double-socket arm
and RAM-B-238 1" aluminum ball mount.
When loosening the side screw, a single spring inside
the arm opens the sockets allowing you to pivot the ball and socket
connection or completely disconnect the ball from the socket. The
arm length is 3.0" when measured from socket center to socket
center. The total length of the arm is 3.69".
Powder-coated Marine grade aluminum.
This product is packaged in
a poly bag. |
$26.99
|
|
|
 |
RAM-B-201
3.69" aluminum double-socket arm for 1" ball mounts.
The standard 3.0" double socket arm has a socket at
either end to allow a 1" diameter ball accessories to be connected.
The arm length is 3.0" when measured from socket center to socket
center. The total length of the arm is 3.69".
Powder-coated Marine grade aluminum.
This product is packaged in
a poly bag. |
$14.99
|
|
 |
RAM-B-224
4"
suction-cup mount with 1" ball.
Large 4" Rubber Suction Cup base has a 1.0" diameter Rubber Ball
connected at right angles. The suction cup is designed to hold on any
smooth non-porous surface, but for best result, mount the suction cup on
a glass surface.
This product is packaged in
a poly bag. |
$24.99
|
|
 |
RAM-B-238
1" aluminum ball mount.
The RAM universal plate has a 1.0" diameter rubber
ball connected at right angles to a 1 1/4" x 2 1/2" diamond plate. The
plate has two holes 1.912" from center to center, positioned at either
tip of the diamond plate. This base plate will attach to any of the RAM
plastic HOL holders and the industry standard AMPS hole pattern.
Powder-coated Marine grade aluminum.
This product is packaged in
a poly bag. |
$8.99
|
 |
RAM-HOL-PD2 Cradle
for PDAs WITH extended battery. This is perfect
for the HP iPAQ HX4700 or HX4705 with an extended battery, or for
other PDAs with a sleeve or rear-mounted GPS unit. If your PDA does
NOT have an extended battery, please use cradle # RAM-HOL-PD3U below.
Comes with a set of different-sized "fingers" for easy mounting of
almost any size PDA. High-strength plastic.
This product is packaged in
a poly bag. |
$20.99
|
|
 |
RAM-HOL-PD3
Universal cradle for PDAs WITHOUT extended battery. Perfect for the PDAs without an extended battery or sleeve. If your PDA
DOES have an extended battery, please use cradle # RAM-HOL-PD2 above.
The RAM-HOL-PD3U spring loaded cradle expands top to bottom to hold PDA
securely. Four side pins are supplied; these can be positioned to suit
the width and shape of the PDA. The cradle does not ship with a RAM
ball. To add a 1" ball to this cradle you need to purchase RAM-B-238 plastic ball mount
for cradle below. High-strength plastic.
This product is packaged in
a poly bag. |
$13.99 |
|
 |
RAM-HOL-UN1
Small
side clamping universal cradle. The Small
RAM Side Clamping Cradle is designed to hold different kinds of cell
phones and electronic devices such as the IPOD MINI and Nano. This
cradle has padded locking side clamps that close tightly on the item
you want to hold. Minimum
Width: 1.5 in / Maximum Width: 2.5 in / Side Clamp Height: 1.56 in /
Side Clamp Depth: 1.13 in / Cradle Height: 3.62 inches.
This product is packaged in
a poly bag. |
$24.99 |
|
 |
RAP-B-201
3.69"
high-strength plastic
double-socket arm for 1" ball mounts.
The standard 3.0" double socket arm has a socket
at either end to allow a 1" diameter ball accessories to be connected. The arm length is 3.0" when measured from socket center to
socket center. The total length of the arm is 3.69".
High-strength plastic.
This product is packaged in
a poly bag. |
$12.99
|
|
 |
RAP-B-238 1" plastic ball mount for cradle.
The RAM universal plate has a 1.0" diameter rubber
ball connected at right angles to a 1 1/4" x 2 1/2" diamond plate. The
plate has two holes 1.912" from center to center, positioned at either
tip of the diamond plate. This base plate will attach to any of the RAM
plastic HOL holders and the industry standard AMPS hole pattern.
High-strength plastic.
This product is packaged in
a poly bag. |
$7.99
|
|
