Computers & Printers |
|
|
|
 |
Service |
|
|
|
|
|
RAM-Mounts™ Products |
|
|
|
|
|
Quick Links |
|
|
|
|
|
About Us |
|
|
|
|
|
|
|
Contact Us |
|
|
|
|
|
|
|
RAM Mounts™ GPS Products (SORTED BY MODEL #) |
|
 |
RAM-B-149Z
U-bolt bicycle and motorcycle universal mount. This versatile
kit includes a RAM-B-231Z U-bolt mount, RAM-B-201 double-socket arm
and RAM-B-238 1" aluminum ball mount.
When loosening the side screw, a single spring inside
the arm opens the sockets allowing you to pivot the ball and socket
connection or completely disconnect the ball from the socket. The
arm length is 3.0" when measured from socket center to socket
center. The total length of the arm is 3.69".
Powder-coated Marine grade aluminum.
This product is packaged in
a poly bag. |
$26.99
|
|
 |
RAM-B-166-GA21
mounting
kit for Garmin GPS units. The RAM Marine Grade Aluminum Mount
with 3.25" Locking Suction Base consists of the 1" dia. ball and
socket system with RAM Composite Cradle for Garmin nüvi 300, 310,
350 and 360.
This is perfect when you need to attach your suction cup mount to
your car dash vertically or horizontally, rather than to your
windshield.
This product is packaged in
a poly bag. |
$25.99
|
|
 |
RAM-B-166-GA22
mounting kit for Garmin GPS units.
The RAM Marine Grade Aluminum Mount with 3.25" Locking Suction Base
consists of the 1" dia. ball and socket system with RAM Composite
Holder for Garmin StreetPilot i3, i4 & i5 / Garmin Street Pilot
c530, c550 & C580 /
Garmin nüvi 200, 250 & 270, 750, 760 & 770.
This product is packaged in
a poly bag. |
$32.99
|
|
 |
RAM-B-166-GA23
mounting kit for Garmin
nüvi 610, 660, 670 & 680
GPS units.
The RAM Marine Grade Aluminum Mount with 3.25" Locking Suction Base
consists of the 1" dia. ball and socket system with RAM Composite
Cradle for GARMIN nüvi 610, 660, 670 & 680. This is perfect when you
need to attach your suction cup mount to your car dash vertically or
horizontally, rather than to your windshield.
This product is packaged in
a poly bag. |
$36.99
|
 |
RAM-B-166-T04
mounting kit for the TomTom
ONE & ONE V2 GPS.
The RAM Marine Grade Aluminum Mount with 3.25" Locking Suction Base
consists of the 1" dia. ball and socket system with RAM Composite
Cradle for the TomTom
ONE & ONE V2 GPS.
This is perfect when you need to attach your suction cup
mount to your car dash vertically or horizontally,
rather than to your windshield.
This product is packaged in
a poly bag. |
$35.99 |
|
|
 |
RAM-B-201
3.69" aluminum double-socket arm for 1" ball mounts.
The standard 3.0" double socket arm has a socket
at either end to allow a 1" diameter ball accessories to be connected. The arm length is 3.0" when measured from socket center to
socket center. The total length of the arm is 3.69".
Powder-coated Marine grade aluminum.
This product is packaged in
a poly bag. |
$14.99
|
|
 |
RAM-B-224
4"
suction-cup mount with 1" ball.
Large 4" Rubber Suction Cup base has a 1.0" diameter Rubber Ball
connected at right angles. The suction cup is designed to hold on any
smooth non-porous surface, but for best result, mount the suction cup on
a glass surface.
This product is packaged in
a poly bag. |
$24.99
|
|
 |
RAM-B-231
U-bolt base with 1" ball. This RAM
universal mount is perfect for mounting practically any device to
your motorcycle or bicycle. Comes with two rubber covers for the
bolt ends. U-bolt may be black or bare metal depending on
availability. Add a RAM-B-201 arm and a cradle for your device for
the perfect mobile setup.
This product is packaged in
a poly bag. |
$14.99 |
|
 |
RAM-B-238
1" aluminum ball mount.
The RAM universal plate has a 1.0" diameter rubber ball connected at
right angles to a 1 1/4" x 2 1/2" diamond plate. The plate has two holes
1.912" from center to center, positioned at either tip of the diamond
plate. This base plate will attach to any of the RAM plastic HOL holders
and the industry standard AMPS hole pattern.
Powder-coated Marine grade aluminum.
This product is packaged in a poly bag. |
$8.99
|
|
 |
RAM-HOL-GA19
cradle for Garmin C320,
330, and 340. Providing ample support while keeping a low profile,
this custom cradle does not add bulk or unsightly composite to the
sleek form of the GPS. The cradle does not block the internal
antenna or speaker and allows for use of the factory 12V power
adaptor. Utilizing a 1" rubber ball, this cradle seamlessly
integrates into any of the RAM compatible mounts.
This product is packaged in
a poly bag. |
$17.99 |
|
 |
RAP-B-201
3.69"
high-strength plastic
double-socket arm for 1" ball mounts.
The standard 3.0" double socket arm has a socket
at either end to allow a 1" diameter ball accessories to be connected. The arm length is 3.0" when measured from socket center to
socket center. The total length of the arm is 3.69".
High-strength plastic.
This product is packaged in
a poly bag. |
$12.99
|
 |
RAP-B-238 1" plastic ball mount for cradle.
The RAM universal plate has a 1.0" diameter rubber
ball connected at right angles to a 1 1/4" x 2 1/2" diamond plate. The
plate has two holes 1.912" from center to center, positioned at either
tip of the diamond plate. This base plate will attach to any of the RAM
plastic HOL holders and the industry standard AMPS hole pattern.
High-strength plastic.
This product is packaged in
a poly bag. |
$7.99
|
|
